|
Acoustical Tile
Coatings
Patch (Elastomeric) for Walls, Roofs
Acrylic Latex Wall Paint, Roof Paint
Patio Paint
Acrylic Silicone Concrete Stain
Polyurethane High Gloss Enamel
Block Fill Primers
Cedar Wood Shingle Sealer
Private Label Manufacturing
Ceiling Paint
Quick Dry Enamels
Real Estate Maintenance Coatings
Latex Paints
Redwood Sealer
Concrete Stain & Sealer
Reflective Traffic Paint
Deck Paint
Door & Trim Enamels - Latex & Alkyd
Roof Paints - Flat and Semi-Gloss
Drywall Flat Coating
Rubber Based Coatings
Electrometric Coatings - Roofs,
Walls Scenery Paint
Semi-Gloss Enamels
Exterior House Paint
Smoke/Soot Sealer
Fast Dry Sealer
Solar Reflective Roof Paints
Federal Specification Traffic Paint
Sports Court Coating
Ferrous Metal Primer
Sports Field Line Marking Paint
Masonry Block Fill Stains for Wood (Transparent/Opaque)
Field Marking Paint
Floor Coatings
Surface Conditioner
Fungistatic Paint
Swimming Pool Paint
Garage Floor Paint
Tennis Court Paint
Grave lock Resin
Theater Scenery Paints
High-Hiding Paint
Traffic Paint - Latex, Alkyd,
Rubber Based,
Hurricane Protection for your Roof
Undercoater/Primer for Wood/Metal
Interior Paint
Underwater Coatings
Long-Term Durability Coatings
Underwater Fairing Compound
Marine Paints & Varnish
Varnish - Exterior, Interior - Satin, High Gloss , Non-Yellowing Acrylic
Metal Finishes
Vinyl Acrylic Paint
Mildew Resistant Coating
"WALL MASTIC"
*****************************************
Home
|
|
Industrial maintenance coating means a
high performance architectural coating, including primers, sealers, under
coaters, intermediate coats, and topcoats formulated and recommended for
application to substrates exposed to one or more of the following
extreme environmental conditions in an industrial, commercial, or
institutional setting:
High temperature coating
means a high performance
coating formulated
and recommended for application to substrates exposed continuously or
intermittently to temperatures above 202 deg.C (400 deg.F).
Impacted immersion coating means a high performance
maintenance
coating formulated and recommended for application to steel structures
subject to immersion in turbulent, debris-laden water. These coatings
are specifically resistant to high-energy impact damage caused by
floating ice or debris.
|
Rust preventative coating means a coating
formulated and recommended for use in preventing the corrosion of ferrous
metal surfaces in residential situations.
Sanding sealer means a clear wood coating formulated and recommended
for application to bare wood to seal the wood and to provide a coat that can
be sanded to create a smooth surface. A sanding sealer that also
meets the definition of a lacquer is not included in this category,
Sealer means a coating formulated and
recommended for application to a substrate for one or more of the following
purposes: to prevent subsequent coatings from being absorbed by the
substrate; to prevent harm to subsequent coatings by materials in the
substrate; to block stains, odors, or efflorescence; to seal fire, smoke, or
water damage; or to condition chalky surfaces.
Semitransparent means not completely concealing the surface of a
substrate or its natural texture or grain pattern. Shellac
means a clear or pigmented coating formulated with natural resins
(except nitrocellulose resins) soluble in alcohol (including, but not
limited to, the resinous secretions of the lac beetle, Laciffer lacca).
Shellacs dry by evaporation without chemical reaction and provide a
quick-drying, solid protective film that may
be used for blocking stains.
Stain means a coating that produces a dry
film with minimal coloring. This includes lacquer stains.
Stain controller means a conditioner or pretreatment coating formulated and
recommended for application to wood prior to the application of a stain in
order to prevent uneven penetration of the stain.
Swimming pool coating means a coating formulated and recommended to
coat the interior of swimming pools and to resist swimming pool chemicals.
Thermoplastic rubber coating and mastic means a
coating or mastic formulated and recommended for application to roofing or
other
structural surfaces and that incorporates no less than 40 percent by weight
of thermoplastic rubbers in the total resin solids and may also contain
other ingredients including, but not limited to, fillers, pigments, and
modifying resins. Tint base means a
coating to which colorant is added in a paint store or at the site of
application to produce a desired color. Traffic
marking coating means a coating formulated and recommended for
marking and striping streets, highways, or other traffic surfaces including,
but not limited to, curbs, berms, driveways, parking lots, sidewalks, and
airport runways. Undercoater means
a coating formulated and recommended to provide
a smooth surface for subsequent coatings.
|
Varnish means a clear or semi-transparent
coating, excluding lacquers and shellacs, formulated and recommended
to provide a durable, solid, protective film. Varnishes may contain
small amounts of pigment to color a surface, or to control the final
sheen or
gloss of the finish. |
Lacquer means a
clear or pigmented wood finish, including clear lacquer sanding
sealers, formulated with cellulosic or synthetic resins to dry by
evaporation without chemical reaction and to provide a solid,
protective film. Lacquer stains are considered stains, not lacquers.
Low solids means containing 0.12 kilogram or less of solids per
|
| |
|
| |
|
| |
|
|
Movie, Theater, Stage & TV Set Scenery Paint Warehouse Floors
Non-Skid Coatings
Waterproofing-Walls, Roofs
Non-Yellowing House Paint and Semi-Gloss Enamel
Water-Repellant Coating for Wood
One-Coat, High Hiding Paint
Wood Stain - Latex and Oil Based
Top |